is it a clubbie type vehicle eg. westfield, caterham or other?

How about a factory rwd 2.5 v6, heaps of aftermarket support for the VQ

VQ25HR
The 2.5 L VQ25HR (for "High Revolution" or "High Response") is only offered on longitudinally-mounted engine vehicles which tend to be rear wheel drive or all-wheel drive. Bore and stroke are 85 mm and 73.3 mm, with a compression ratio of 10.3:1. It produces 235 PS (173 kW; 232 hp) @6,800 rpm and 194 lb·ft (263 N·m) @4,800 rpm. It has dual CVTC for both intake and exhaust, microfinished camshafts and a redline of 7,500 rpm.

It is fitted to the following vehicles:

2006–present Nissan Skyline V6 250GT Sedan - 235 PS (173 kW; 232 hp)
2006–present Nissan Fuga 250GT - 223 PS (164 kW; 220 hp)
2006–present Infiniti M V6 M25 Sedan - 222 hp (166 kW)
2010–present Infiniti EX J50 EX25 Crossover SUV - 235 PS (173 kW; 232 hp)
2011–2012 Infiniti G V6 G25 Sedan - 218 hp (163 kW)
2012–present Mitsubishi Proudia 250 VIP - 223 PS (164 kW; 220 hp)

Im sure with good springs, redline limiter removed 8500rpm
vq35 or vq40 itbs it will be a rocket with this stroke