Yes they are the same size....here at the dimensiosn of the A14/15 bearings etc..

CRANKSHAFT AND MAIN BEARINGS
........................ Number of main bearings 5
............... End thrust taken at No 3 main bearing
................. End thrust clearance 0.05-0.30 mm
Main bearing journal diameter .... 49.951-49.964 mm
Main bearing journal under-sizes . . 0.25,0.50,0.75 mm
. . . . . . . . . . . . Main bearing journal taper limit 0.03 mm
Main bearing journal out of round limit ...... 0.03 mm
Main bearing to journal clearance .... 0.026-0.100 mm
.................. Crankpin diameter 44.961 -44.974
Crankpin undersizes ........ 0.08,0.25,0.50,0.75 mm
. . . . . . . . . . . . . . . . . . . . . Crankpin taper limit .0.03 mm
. . . . . . . . . . . . . . . . Crankpin out of round limit 0.03 mm
............... Bearing type Replaceable steel backed
. . . . . . . . . . . . . . . Connecting rod end float 0.1-0.4 mm
....... Crankpin to bearing clearance 0.030-0.100 mm
......... Bearing undersizes 0.08,0.25,0.50,0.75 mm