Well now i have the A15 in and running, when it gets to operating temp, and therefore maximum pressure the bottom hose pops off the block. Now what i have done is cut the pipe off just before the first heater hose T as im not running a heater. This removes the lump at the end. I know ive seen other A15 owners who have done this. What have you done to hold the hose on there.

So far i have attempted stripping the paint off the tube and scratching it up a little and using the "sticky black loctight ####" on it.

If nobody has some miricle cure, ill bring the welder home from work again and weld a blob or 2 on the end.

Thanks guys and girls!



you can see in the top left insert what i mean.