Browsing this Thread:
1 Anonymous Users
|
|
Re: A series electronic distributor conversion |
|
Home away from home  
Joined:
2006/5/11 1:54
From brisbane, qld
Group:
Registered Users
|
See, i have made an adapter plate so you just bolt the pulsar dissy and strap it on with the a series cog attached.
There is no grinding or modifying the dissy other than attaching the gear. you could pull it out and reuse it in a pulsar if you wanted to.
Im looking into cnc cut adapters so they will look nice and there will be no dramas for someone to do at home in half hour or so.
One drill hole and away you go. Technically anyone could modify a pulsar dissy by grinding off bits and tapping a thread, but its far easier to just drill one hole, attach a gear and bolt it in.
Posted on: 2007/8/1 23:52
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
