Browsing this Thread:
1 Anonymous Users
|
|
Re: flywheel identification |
|
Home away from home  
Joined:
2004/7/22 4:52
From Seattle ,WA.
Group:
Registered Users
|
I had an F10 once, I have no idea what the flywheel looked like though. Would it have been a smaller diameter?
Would the previous guy have used it on this motor for weigh savings or some such? My plan had been to bench run this motor & I needed to put a started on it so I pulled the flywheel for an A14 I had to get the cover/protector plate to swap onto the A12 & then took this flywheel off the A12 & I found the differences then.
It even looked like someone had previously milled the bolt heads down, they had a very shallow head on them, approx. 3/16" high.
Posted on: 2007/8/5 21:06
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
