Browsing this Thread:
1 Anonymous Users
|
|
Re: Brake upgrade advice |
|
Home away from home  
Joined:
2006/12/14 2:13
From whakatane, but most of the time canterbury NZ
Group:
Registered Users
|
So what are you trying to achieve with the drum hub on the disk strut? When I was trying to sort out my front end set up I found that the brackets for the Caliper were going to be Bloody hard to make to suit the disk strut.
Instead why dont you slip the s13 disk over the drum hub and then get 2.5mm machined off the mounting face of the hub. Or half machined of the disk hat and half machined off the hub face. That will leave yu with stock track width.
With that setup you may run into trouble with the caliper contacting on the back of the wheel.
Mine just touched but I just cleaned up the caliper with the grinder and its perfect.
Posted on: 2007/11/15 5:23
|
|
_________________
Experience is directly proportional to the amount of equipment ruined.
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
