I've been contemplating going to bigger valves in my GX head, the next time I rebuild my A15. I'm told that It's safe to go to 42mm inlets, and 35m exhausts. (Same as L18)
I'd just use A12 inlet valves for the exhaust, and do the cut down L18 thing with lash caps for the inlets. (unless I can find a valve the right length from another engine)
something which has sprung to mind, (I'm hoping someone who is running these valves can advise me) is when running valves this big, is it necessary to machine releifs into the bore walls to allow clearance between the valve and the bore wall/ blockdeck?
The A12's have this, as do the A14/15's to a much lesser extent. (My a15 is .040 over, so these reliefs are pretty much gone) I realise that the valve doesn't protrude far below the deck.
I heard a story from my mates dad who is a mechanic. A customer of his tried to soup up a triumph. He got some flash harry mechanics to fit a bigger cam. When the valves hit the block deck, it kept snapping rocker arms. They kept on fitting new ones. My mates dad got the "pleasurable" task of repairing all the damage, after they finally came to the realiseation that something wasn't right. So keeping with that theme, I'm a firm believer in thinking through these sorts of things long before ever picking up a spanner. The other thing I was concerned about, is I want to have the block O ringed for the next build. But I'm unsure about how valve releifs in the cylinder wall might reduce the room for this to be done.
so what has everyone else done in these circumstances?