Not 100% sure about shipping OS. But if you are keen, l'll work something out (send me a PM with details, and l'll get back to you).

The "trial fitment" pics are more for ensuring the PCD into the chassis is correct, and also that the adjustment screws don't foul and allow enough movement.

There are 6 adjustment holes, and full length slot (plus the bottom plate can be rotated 180 degrees), so there is a large amount of movement (positive and negative camber) possible.

The picture is in a "rough" centre position, but heaps more negative is possible by moving those two bolts to the other end of the plate.

Cheers
Andy