Browsing this Thread:
1 Anonymous Users
|
|
Re: wanted stuff for turbo conversion |
|
Home away from home  
Joined:
2005/12/7 4:37
From Bendigo, Victoria, Australia.
Group:
Registered Users
|
for a blow through turbo setup you will need
1x manifold
1x turbo
1x BOV
Piping:
1m of 2.5" pipe and 1x 180deg bend for dump pipe (add more if you don't alreaddy have a big exhaust)
1m of 2" pipe for intake pipe and 3x 180deg bends
aswell as various silicone hose joiners and s/s welding wire
1x carby hat
1x rising rate fuel pressure regulator to suit carby
1x fuel pump (i used a VL commodore external one)
1x Z200 fuel filter
5m of EFI hose for fuel/oil lines...
various brass fittings for oil/water feeds/returns
1m of 1/2" heater hose
lots of hose clamps
optionals (recommended):
1x Intercooler
1x larger radiator
1x Thicker head gasket
1x carby rebuild kit (and larger jets)
1x boost gauge
1x boost control valve (or some device for turning boost up)
i have done my build on $1800 (thats me doing all the work myself) but it can be done for less.
Posted on: 2008/5/12 12:15
|
|
_________________
"Like a Rolling Stone"
Bob Dylan
New Daily: <<<<Now For Sale.
1972 B110, 13" Bathurst mags, airbrus
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
