Howdy fellas,

Thanks for all the kind words, and yes it is running a FJ20 with twin 45mm webers. This makes it so simple to work on. the wiring loom is about 8 wires going to the front of the car and 3 going to the rear.

It sounds different because I have used the standard headers due to the lack of space. It revs to 8 in first and 7 every where else.

The front struts and brakes are 240z (I think). the struts have been shortened and camira inserts fitted (they just happened to be the right dia and length).

The rear diff is from a c20 vanette and is fitted with 120y front disc brakes. The 4 link and watts in the rear are my own design.

It is a bit rough around the edges but was built to be very cheap fun.

Hillclimbs are for everyone and anyone. lots of people use there standard road cars and have a ball.

there are pictures of the Coupe in the project build section on this forum.

Cheers,
Geoff