O.k made the plate for underside of RSP with all nuts welded to it and hit with some welding paint. Found a bit of aluminium angle to fit between radiator and lip of RSP. All fitted back up with some stainless Allen key bolts and washers she is as solid as a rock just going to round the corners of the Alloy angle and run a small rubber strip i have a long the edges so no vibration then a thin screw with rubber washer threw each Radiator bracket into it to hold it in place. Thinking i will polish the alloy angle right up once its all fitted and going back together. really happy phone pics not that clear but you get the idea. P.S you can kind of see the Scalloped X member in last pic.

Attach file:

---

  Radiator Mounting bar 1.JPG (199.03 KB)


  Radiator Mounting bar 2.JPG (198.30 KB)


  Radiator Progress 1.JPG (150.11 KB)


  Radiator Progress.JPG (196.56 KB)