Browsing this Thread:
1 Anonymous Users
|
|
Modded A15 problem |
|
Just can't stay away 
Joined: 2007/11/17 13:25
From Malaysia
Group:
Registered Users
|
Engine Specs Nissan Vanette C20 A15 1500cc Australia Regrind Cam 270⁰ 6.5mm Lift (Stock 240⁰ 5.5mm) Skimmed Head 0.5mm Wider Valve Angle (3⁰ - 5⁰) Std valve clearance spec (Cold 0.30mm)
Fuel System Twin Dellorto DHLA 4 wif Trumpet 32mm choke 33 Pump jet 200 main air bleed 7727.7 Emulasion Tube 135 Main Jet 7850.3 Idle air corrector 50 Idle jet Japan Fuel Pump 4psi (Build in regulator)
Ignition System MSD Blast 2 Racing Coil Performance Plug Cable (Low Resistance 2k ohms) NGK Platinum plugs A15 Electronic Dizzy Ignite at 12⁰ BTDC without vacuum port
Exhaust System A15 4-2-1 Extractor 1.6” Piping 2 Center bullet Rimus Muffler
Im having some problems....
1)when i part throttle, the engine sound like nosedive below 2.5k rpm.(No prob after tat)
2)Then engine cant rev past 6k rpm.(expected above 7k rpm)
Pls help... Thanks in advance....
Attach file:
DSC04167.JPG (123.35 KB)
Posted on: 2009/8/31 6:34
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.