there are some pics here and some more here
i used R33 296mm discs and r32 gtst/300zx tt calipers
you just modify the disc to suit the hub, enlarge the centre bore and redrill it to suit the disc bolt pattern

i had new discs and pads so i could sit the calipers on the disc and they held there pretty well to measure and made template brackets up. its all easy enough once the disc is on the hub


240z struts are pretty good for stanza struts, more than 50mm shorter though, but thats always handy as even with the z inserts if the cars low enough you can find the bump stops