User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Re: Temp Sensor Resistence Check ?
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
The voltage is supposed to fluctuate, because of the gauge regulator.

The sender works off restistance. Measure the ohms of the sender.

Quote:
Accuracy Test

* Buy a 116-ohm resistor at Radio Shack or other electronics store.
1. At the engine, locate the thermal transmitter:
2. Pull the wire off the transmitter and put a 116-ohm resistor from the wire to earth/ground
3. Turn IGN switch to "ON". Gauge should read 50C/122F, or between C and H ranges (in middle range)

Posted on: 2010/2/13 21:34
Transfer the post to other applications Transfer

Subject Poster Date
     Temp Sensor Resistence Check ? Sumith 2009/10/29 5:33
       Re: Temp Sensor Resistence Check ? ddgonzal 2009/10/29 8:19
         Re: Temp Sensor Resistence Check ? Sumith 2009/10/29 8:58
       Re: Temp Sensor Resistence Check ? levey 2009/10/29 11:03
         Re: Temp Sensor Resistence Check ? Sumith 2009/10/29 11:30
       Re: Temp Sensor Resistence Check ? levey 2009/10/30 11:31
         Re: Temp Sensor Resistence Check ? levey 2009/10/30 11:55
       Re: Temp Sensor Resistence Check ? ronald_loulan 2010/2/13 7:46
       Re: Temp Sensor Resistence Check ? ddgonzal 2010/2/13 21:34
       Re: Temp Sensor Resistence Check ? ronald_loulan 2010/2/18 0:59
         Re: Temp Sensor Resistence Check ? ddgonzal 2010/2/18 4:27
       Re: Temp Sensor Resistence Check ? ronald_loulan 2010/2/18 12:17




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]