i have just pulled out my fuel tank to have a good look at sizes of lines and such. my fuel setup will consist of somewhat of the following:
5/16" hose from tank to Carter Black lift pump (with filter in between), 5/16" hose from lift pump to surge tank, 1/2" hose to bosch 044 (with filter in between), 5/16" (bundy tube or similar) to fuel rail, 5/16" (bundy tube or similar, after pressure reg.)return to surge, 1/4" hose return to fuel expansion chamber (in side of ute), 1/4" hose back to fuel tank.
my question is because the fuel line from the tank (feeding surge tank) is only 1/4" should i replace it entirely OR can i get away with just using 1/4" hose to filter/lift pump then use 5/16" from outlet of lift pump to surge (if i get the right fittings.) or will this 'starve' the lift pump.
what have other people done.
keep in mind i have everything i need to do the fuel system and do not want to use a different tank.
hope this isnt too confusing
Thanks again
Tom