Ill start the table please copy and paste and add your info please
The ozdat calc has been around a while but it always annoyed me having
to type everything in all the time. The Ozdat Mod has asked me for all
the info but need your help.

A14, A15
Intake valves: 37mm
Exhaust valves: 30mm
Bore: 76 mm
Stroke A15: 82mm
Stroke A14: 77mm
Pin Heights: A15: 30mm , A14: 32.5mm

A12
Intake valves: 35mm
Exhaust valves: 29mm
Bore: 73mm
Stroke: 70mm
Connecting rod: 121.5mm
Block Height: 189.1mm
Displacement: 1171cc
Compression ratio: 9.0:1 or 9.5:1

Connecting Rods

Standard shaft size (Housing bore)
44.961/1.7701 (48.000/1.8898)
44.974/1.7706 (48.011/1.8902)


Mains - for all A12,A13,A14,A15 engines only.

Standard crank Main shaft size (Housing Bore)
1,5
49.951/1.9666 (53.657/2.1125)
49.964/1.9671 (53.670/2.1130)
2,4
49.951/1.9666 (53.657/2.1125)
49.964/1.9671 (53.670/2.1130)
3 (Fl)
49.951/1.9666 (53.657/2.1125)
49.964/1.9671 (53.670/2.1130)