Browsing this Thread:
1 Anonymous Users
|
|
Re: a14 problem |
|
Just can't stay away  
Joined:
2007/4/20 11:46
From Invercargill, new zealand
Group:
Registered Users
|
have you ensured that the rocker cover gasket is sealed nicely? it often takes going round the screws three times and tightening them to get a good seal. If its not that then I ask did you use a gasket sealant on the other cork gaskets like for the sump? the cork gaskets arent always that great at sealing on their own so it sometimes helps to smear a thin layer of master gasket on either side of the cork gasket. If the oil is coming out from behind the flywheel you need to ensure that you got the rear main crank seal on the correct way and that you put the bung in the rear oil gallery hole if you took it out during the rebuild.
Posted on: 2010/2/19 8:52
|
_________________
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
