Browsing this Thread:
1 Anonymous Users
|
|
Re: cannot get 120y to idle |
|
Just can't stay away  
Joined:
2010/4/15 9:45
Group:
Registered Users
|
no i don't know if timing is correct but it wouldnt be that far out but with the head of tdc is right on 0 and rotor points very close to #1 distributor position
firing order that i am sure of. 1-3-4-2 counter clockwise with 1 on the notch
im starting to think that my carburettor is shot. or its a vacuum problem.
which could be one of two variables because it only happens at idle. The carburettor has a broken throttle butterfly or extremely clogged slow/idle jets which just cant seem to get unstuck
or a very large vacuum leak? although i cant seem to find this vacuum leak. manifold vacuum is plugged with a brass plug, the only vacuum i have is pcv which i doubt is leaking because ive checked it 100 times. carb has new gaskets so no leak there either.
distributor is plugged up so no leak there either.
Could vacuum leak from the sump??
Posted on: 2010/5/25 16:47
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
