Browsing this Thread:
1 Anonymous Users
|
|
Re: question for the painters |
|
Home away from home  
Joined:
2010/1/2 8:56
From Sydney
Group:
Registered Users
|
3 turns of the material that comes out of the gun (paint) good painters usually finish with just the 2 coats of paint. 1st coat dose not need to fully cover the pannel ( try to but ) with it being medium coat 2nd coat it the finishing look coat so thats the wet coat, just make sure you never apply paint on the same spot twice but with very even over lapping coats and watch the paint go on the pannel so you know your not smashing the paint on wet for runs... your air pressure is at around 2 bar can put it on lower or higher ( depends on your feel for paint )
Posted on: 2010/9/26 9:54
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
