Here is what's needed:

280ZX Strut, lower control arm, radius / castor rod.

The stock spring is the same diameter as the 1200 I just do not know if the ZX top spring mount fits within the strut tower (Mine have coil over set-up), The cross member will needed to be modded to fit the the ZX control arm. The sway bar end links and or mounting location on the control arm will need to be modified. The tie rod ends I have are custom for racing but I believe you can use the 280ZX parts at the strut and then the rest is stock 1200. If you wish to run the 280ZX brake caliepers with 13" wheels the need to milled about 5mm on the top so they clear.


Tom