All right, you’ve convinced me to have a go at the under dash set up.

-What’s the best master cylinder to use?
-Is it necessary to weld the bracket to the steering column or can I bolt a plate to it?
-Do you need to use a remote filler?
-What’s the best lines to run? One braided one or a metal line with flex hose at the slave cylinder?
-I had a look at the clutch pedal you made for me Pigdog, you welded a new piece on top that has a hole instead of the old hook thing. I’m guessing the master cylinder lines up to the top of the pedal

Thanks for the help