Browsing this Thread:
1 Anonymous Users
|
|
After Market Temperature Gauge Wires Burning |
|
Just can't stay away  
Joined:
2002/11/18 21:48
From Birchip, VIc , Australia
Group:
Registered Users
|
Hi all, I haven't surfaced for a while as the project has been on hold. Getting married, buying a house and having a kid will do that. But I haven't given up my dream build of the 1200 ute.
I am asking anyone's advice and help? I have a 'Pricol' electrical Oil Temp Gauge that is installed and working fine. I just went to install a 'Speco' electrical Water Temp Gauge and the power wire burnt up. I have moved the earth wire to two different spots and that didn't solve the problem. I disconnected the sender wire and the problem still occurred. I installed a fuse in the power wire and it blew immediately as I turned the key to Ignition. I sourced the power from the other working gauge and so they both run from the same power wire. However the wire to the 'Speco' gauge still burns through. Any Suggestion?
Posted on: 2011/2/14 10:40
|
|
_________________
If you get a lemon, remember to ask for the tequila and salt!
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
