Browsing this Thread:
1 Anonymous Users
|
|
Chromoly 3-piece A-series pushrods |
|
Home away from home  
Joined:
2002/3/22 14:50
From St. Louis, MO USA
Group:
Registered Users
|
Guys, I have thousands of used, lightly used, some barely used 3-piece chromoly pushrods for the A-series Datsuns. Every time I build a new engine, a little comes off the deck, a little is reground off the cam, so each engine requires a different length chromoly pushrod.
$5 USD each.
These pushrods can be shortened (quite easily) using a tubing cutter. Most are longer than stock A14/15 pushrods. Some are slightly longer than A12 1200 pushrods. To shorten, I cut off of the bottom, push the bottom ball out of the scrap piece, and then push the ball end back into the pushrod tube using a piece of hardwood and a dead blow hammer. [We do it at the race track on the rare occasion when we break a rocker adjuster screw and need a replacement pushrod.]
Shipping worldwide is $20 USD for a set of pushrods (or the same for 2-3 sets). Peter
PeterZekert (at) Juno (dot) com
Posted on: 2011/4/14 22:08
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
