Here's the 60-2 parts disassembled. It's the standard 20V pulley that came on the motor that's been machined, the front ancillary pulley has been completely removed and the rest machined only enough to have flat surfaces where they are needed. The 4AGE pulleys have 2 bolt holes, I suppose for a puller, from the factory so it won't be any weaker than standard.



Here's the whole thing assembled. As you can see very compact and will look good on the motor. 100% fully adjustable to any angle you might need. I'll be placing the sensor in the fanbelt loop if you understand what I'm getting at, so the sensor doesn't need to be removed to replace the fanbelt.



We've already checked, we will be able to do this with any of the many variations of 4AGE pulleys there are.

And some more progress pictures of the body coming together.













12