No Accessories. I was going to see if I could use it as a prospect for a conversion and take it from there.

It has the water pump, crank pulley and belt. Usually on these motors there is no seperate plate to spigot the starter as there is provision in the block but my plan was to use the A series plate and modify the block as it's alloy and use all A series mounting hardware.

I'll post some pics of the stuff. It's a very cool engine. Depending on what site you look some say they put out 67kw @tw and Nissan says 72kw @tw. But either way you look at it it has a massive amount of potential with quad throttle bodies and aftermarket ECU. It has a Cam Pos Sensor in the back of the head. The Crank sensor was in the transmission with the trigger on the drive plate but that can be modified easily enough to the front.