Browsing this Thread:
1 Anonymous Users
|
|
Re: Datsun 1600 wagon diff into 1200? |
|
Home away from home  
Joined:
2003/11/27 13:29
From Melbourne
Group:
Registered Users
|
Michael...Thanks for the additional info. Have also found some detail on the Martybugs 1200 conversion site.
Just measured from flange to flange and it's 1220mm. Hope that helps.
The springs are 60mm wide as opposed to the 1200's which are 50mm wide, however the centre of the spring perches seems to be identical. So I'm hoping I can just weld a piece of plate with the correct size hole in it (as the 1600's is way to big) for the 1200's locating bolt and then use the rest of the 1200's U-bolts and shocker plates.
Mind you my plan is to get engineered with standard diff and not worry about upgrading till it breaks.
Posted on: 2011/11/21 0:03
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
