Hi all,

I'm working on fitting a edis style trigger wheel inside an A series points distributor. The small 63mm laser cut wheel I got off Trigger-Wheel for 31 pounds (http://www.trigger-wheels.com/store/contents/en-uk/d5.html). It fits inside the upper part of the distributor with a small amount of clearance ~1mm.

I need some help making a bushing up since I don't have access to a lathe. All I need to do is machine a 7mm pilot and a 12.4mm diameter shoulder onto a 20mm long piece of 3/4 hex bar. I don't have the material either. (A bit bigger/ smaller hex would be fine). I'm in the northern suburbs of Melbourne and would appreciate help with a lathe or being pointed in the direction of a machinist. Plan is to cut an M8 thread into the distributor shaft and bushing and fix it all with a lock nut. Happy to supply the pdf workshop drawing.

With that bit done I'll fit a sensor into the side of the distributor and I'll have a cam trigger wheel to run coil on plug.

Attach file:

---

  Bush.jpg (50.49 KB)