Browsing this Thread:
1 Anonymous Users
|
|
Re: A14 stalls upon stopping |
|
Moderator  
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
|
Glad to hear the alternator is working now.
Setting the float level in Weber 32/36 is similar to how it's done in many motorcycles. Instructions are on the Weber web site.
Don't do any adjusting until the float level is set correctly.
What you don't want to do is adjust all the knobs and sliders looking for a good setting. Instead, set it to the manufacturer's settings. Weber has step-by-step settings on the web site.
For Datsun A15, set the timing to 7 degrees BTDC. No more and no less. Make sure the distributor vacuum advance is not connected to the intake manifold.
For A14/A15, set idle speed to 750 RPM. Then adjust the mixture, and if the speed changes at the best mixture, set it back to 750 RPM and re-adjust the mixture until the mixture is correct at 750 RPM.
The order these things are done are important. Timing and float level are first as everything else depends on them.
Posted on: 2012/5/28 7:01
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
