cheers DD

I found this:
"If you want your 1200 to have some -ve camber (factory spec is +1.5 degrees), just move the lower control arm mounts in the cross member. Redrilling the mounts about 10mm outward from their original position will result in about 0.5 degrees of negative camber, and will definitely make the car handle better, making it less susceptible to understeer when cornering fast. "

from here: http://martybugs.net/DatsunMods/suspension.cgi

If I did that RHS only would that help?

here is the wheel align report:


http://datsun1200.com/modules/myalbum/photo.php?lid=24700