Just wondering ,do you see any problems with putting an rb30t into a 92 rodeo ute? It cane our with a 2.6l 4 cylinder petrol and ive put a 3lt turbo 6 in it
As far room goes it fits but I've had to cut the rad support to get the motor and box in as one peice
My question is
Will 10mm thick plate be enough for the engine mounts ,they're plates that bolt to the stock chassis mounts and have grade 8 12mm bolts holding them to the chassis and then the rubber moun lt bolts into them about an inch forward
What's the type with clearancing ? The head is about an inch away from the firewall And the radiator is about an inch away from the timing cover
The sump is custom and has heaps of room and won't rub on anything
The tunnel is stock hasnt been belted at all ,Shifter hole has moved back about 30mm ,is that a problem?
sorry for bombing a datsun forum with my #OOPS# but not very often you get to ask these type of questions
Cheers
Posted on: 2012/7/17 2:21
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
Transfer
