hey jmac ,ill pm you but im happy with $300 for the lot ill give you all my coupe lights cos they are no use to me ,so youd have enough lenses to make a set and have spares

im about 45 minutes from those depos but i could probly get a pallet send up to the depo and sent from there as its hard to take time off work

ill throw in the coupe rear wedge shaped lights and trims aswell if you want them?

havnt posted anything large before but ill ring around to morrow and see what i needa do to get it sent up to the fremantle depo

as for the carby parts ,it was the 2 covers hat go in between the throats on the back side ,they cover the thorttle pump linkages ,the 4 screws and a spring that does something special (dunno what it does)

as far as i knew it was all there ,never played with webers so i didnt notice ,and just now D has mentions there was apparently a float missing and jets missing ,i had the tops off and both foats were in them aswell as all the jets as i checked them for sand and stuff ,just to make sure it wasnt something simple that was making them run rough

i put a battery on charge tonight so it should be nready to do a comp test on the a12 dale :D

got 2 late a12s ,one i cant sell with the numbers on it as its the original motor for my ute and would like to keep the numbers ,the other is as being held for dale (rooster) but if your after an a12 i can find you one ,mike (dundee1000) has aroung 20 a series motors in his shed (freakin crazy i know!) and he would sell you one

no oval port heads ,best bet would be mike again ,he is awesome to deal with ,bought my a15 block off him and all my bprojects stuff aswell as carbs ,and everything inbetween ,top bloke


thanks Nige!

ill reply to all pms !