Hi All,

Due to an urgent relocation back to Adelaide from Canberra, I need to sell and clear my project 1200 Ute.

Many of you may remeber this ute as Evil Betty, which caught alot of attention back a while ago.

I came by the ute after buying it out of Bendigo, who had bought it from Evil Betty.

This is a short version of what I have. Due to the timeframe, meaning that it must be sold and gone before the 11th September, I am looking to get rid of it all together.

I am willing to consider reasonable offers.

So working backwards, I will start with the bad bits.

1. I am not happy with the fitent of the larger tunnel. It is sound, but for my mind messy. If you are picky, i would be doing it again.
2. The ute is very stripped. There is no front end in the ute, but the back end is all there.
3. I am not 100% certain what I have. I have doors, guards, tailgate, some glass, no bonnett and a bunch of boxes of bits.
Now the good.
1. Good luck finding rust in this ute. There is essentially none. The roof and wiper panel need to go back to metal again, but engine bay has been POR15'd.
2. Other than the engine bay being POR15'd, the change in tunnel and engine bay being seam welded, it is pretty much the same as Evil Betty sold it.
3. It comes with the following.

A complete CA18DET, which cost the guy i bought it from $2.5K
CA18 has no box.
A hard cover for the tray from MADDAT
MADDAT fitting kit for CA including crossmember and dump pipe.
MADDAT under tray fuel package
Speedo and Clutch cable.
Set of rotors and calipers from a R32 GTR

All of this has set me back well over $5.5K. I am open to reasonable offers but it has to be paid for an gone by the 11th September, no exceptions.

As for Photos, I will try to upload some asap. To be honest, it looks pretty much as it did many years ago. It has been stored indoors the whole time.

My best suggestion is come and have a look. You can call or text me on 0459 265 555. I have had to change my phone number.

You will need a car trailer as there is no front end in it. I used to lift it on and ride it on tyres.

Thanks for looking guys. I won't be putting this on ebay as I would prefer this to go to one of you.

Attach file:

---

  IMG_1539-1.jpg (164.32 KB)


  IMG_1540-1.jpg (122.67 KB)


  IMG_1541-1.jpg (188.72 KB)


  IMG_1542-1.jpg (143.99 KB)


  IMG_1543-1.jpg (191.19 KB)