Some more pics guys, Thanks benny for the wheels

Build update: Rebuilt front end going in tomorrow. I have the coilover and camber tops ready to bolt in, but yet to find some one to machine down the hubs for the s13 conversion up here...and the time to find them.

Have a slight vibration above 80km and need to re adjust the diff pinion angle, but holding off on doing until i put new leaf springs in the rear... currently on blocks and dont really like the harshness of them.

Chasing a couple of little oil leeks from the gearbox too. Thinks its from the front bearing cover but its an engine out job to fix :( Now wishing i had enlarged the tunnel...Lol

its running well and goes hard, happy so far but so far to go yet before the blue plate go on.

Attach file:

---

  253316_10152614715909724_6649966904687689128_n.jpg (156.40 KB)


  10672253_10152614716499724_7776781810249485978_n.jpg (73.07 KB)


  1150353_10152614716409724_5356315046325896984_n.jpg (85.74 KB)


  10626525_10152552358744724_8678538105226230399_n.jpg (84.76 KB)