Simon.
Paul is a great bloke and he does it for half the price you would get quoted nywhere else. He is after about $450 +p&h for the engine and gearbox mounts and clutch conversion I think. I bought a few more bits off him as well so I cant remember exactly.
Good luck

Last day of uni 2day. Gonna get all greasy tomorrow tearing out the old hard lines and putting in the new ones. I have found an aluminium U section that will bolt up to the underside of the body to run fuel lines down. Will the old fuel line move enough fuel to be used as a return line?
I am gonna relocate the battery to the tray as well so I need nother guard for those as well. And yes before nyone yells at me I will use a separate guard for fuel and spark.

Another thing I was thinking of is getting a fibreglass hard top for the tray. I would have to get it custom I guess. Could I just lie a wood platform flush with the top of the tray and a plasic sheet over that and the sides of the ute and start rolling out the sheets of glass and resin? Do I need a gell coat to start or what? Any fibreglassers or board shapers on this site?

thanks
Have a good day fellas
mely