Browsing this Thread:
1 Anonymous Users
|
|
Re: 280zx struts into 1200 |
|
Moderator  
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
|
Grab the whole front strut/brake assembly as well as the brake hoses. There's no difference in the front suspension/brakes on any of the 1979-1983 280ZX (although rear brakes vary).
Yes, you can purchase these parts new from Nissan for $$$. Or from supercheap you can get the rotors, calipers, bearings, balljoints, hoses and strut insert cartridges $$.
It will be far less expensive to get a good used units from the wreckers $, depending on the wrecker. I can buy them for $75 per side from pick-a-part type places, although regular wreckers may want $150 side.
These are NOT required:
* Camber plates (minimal camber change results from the ZX swap)
* Strut housing shortening (ZX strut is already short)
* Aftermarket coilover springs
* Custom top hats
* Changed master cylinder
* Custom/modified castor rods
Posted on: 2013/1/14 6:54
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
