Browsing this Thread:
1 Anonymous Users
|
|
Re: a12 reliable power options |
|
Moderator  
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
|
Spacers are indicated if you are revving over 7,000 RPM.
Go with a mild cam for low RPM usage.
If you want a power increase over the stock cam, which means revving the engine higher, use a GX cam or equivalent (6500 RPM usage).
I recommend the stock cam. It is perfect for reliable power in the 3000-6000 RPM range.
> what's a reasonable over bore size thatd still give me some room in the future
Well since you can go 76 mm in the future, any regular overbore size is fine: 73.5 or 74.0 or 74.5. If the bore are still good, skip overbore and just hone it and new rings. (a +1 mm overbored is good for approximatly 9-tenths horespower (.9) increase).
Posted on: 2013/2/3 2:45
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
