sorry tim,should a thought of that rather than just boasting about it.the site is www.nissan.co.za,the site is in links-businesses under 'new datsun 1200 bakkie from south africa'.when you get onto the site,go to 'OWNING' on the far right,enter'then enter on 'PARTS'.this will bring you to a screen with 4 options,go to 'LIGHT COMMERCIAL VEHICLES',then go to 'MAKE YOUR SELECTION' & choose '1200&1400(1400/5)'.next,go to 'SECTION',choose there,ie engine,powertrain,etc.then choose the subsection,ie intake manifold.this will bring up a screen which doesn't fit my monitor too well,but you scroll up or down,left or right to see the parts.if you go to the numbers on the screen,ie 1 or 2,when the little hand giving you the bird comes up,hit enter & it will give you a listing of nissan part numbers & PRICES IN RAND.i don't know how currrent these are,but as it is 5.5 rand to an australian dollar,& almost 2 dollars aus to 1 dollar us,i suppose just divide by 10.the only problem is it doesn't show an injection manifold in there.also,see my posting about my experiences with these manifolds,& some of the suggestions i made for alternatives.this is on the for sale forum,under 'wtb fuel injection'. hope this helps.paul