Lightened flywheel [6.9kgs] modified to suit a 200mm clutch. [std A-series is 180mm]

Std clutch assembly can be retro fitted if needed. Std dowels would need to be refitted.

4 puk ceramic spring loaded driven plate and uprated pressure plate.

Driven plate is splined to suit the input shaft of the Toyota T50 transmission. Cant remember what the donor pressure plate is from, it does have a REPCO part number stamped into it though.. Replace the driven plate with the appropriate spline to make it work with an A-series transmission.

Can still fit std A-series clutch assembly on flywheel if needed.

Overall condition is good, absolutely no slip and bites very nicely. Pressure plate face is a little worn. Diaphragm fingers have contact marks where the throw out bearing touches the pressure plate. It has served me well and was working perfectly prior to removal.

Asking $240 ono

located in Sydney southern suburbs. Leave a PM if interested.