Browsing this Thread:
1 Anonymous Users
|
|
Re: Weather seals on doors - 1200 ute. |
|
Quite a regular  
Joined:
2011/1/1 0:46
Group:
Registered Users
|
They look like they're on the right way around at least. It's normal for the rubber to fold to a different position at the hinge end of the door - looks like you're's aren't doing that and so that might be why the doors not closing properly.
New rubbers means you'll likely be slamming the doors for a while till they loosten up a bit. I have the same prob on my 1200 boot which (with several coats of paint on both boot and body now) has added about a mm to the rubber space.
Stick the rubbers with contact adhesive. Make sure you apply the adhesive to both rubber and door and let it get tacky quite a bit before pushing the rubber on. Once done - close the door and let the rubber settle. The rubber will then stick in it's natural position on the car, rather than using tape to hold it there.
ZM
Posted on: 2013/7/10 11:54
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
