User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





rgrinder
Re: -ve camber on a 1200
#1
Home away from home
Joined:
2001/2/12 12:02
From Stone Age somewhere in U.S.A.
Group:
Registered Users
Posts: 325
Offline
should work, but it would work better if you were to slot the holes and then use eccentric bolts for adjustment. they are those funny looking bolts that have flat washers welded to then off center. that way when you tighten them up the large flat washer on them helps hold everything tight. IF you are still confused about it go to a front end shop and ask them to show you what they look like.
as an alternitive, why not just put in a longer lower control arm? as I recall the 79-82 B310 ones will work and are about 10mm longer.

Posted on: 2002/9/12 5:55
Transfer the post to other applications Transfer

Subject Poster Date
     -ve camber on a 1200 datto_dave 2002/9/11 9:47
       Re: -ve camber on a 1200 ang94541 2002/9/11 17:50
         Re: -ve camber on a 1200 L18_B110 2002/9/11 23:00
       Re: -ve camber on a 1200 rgrinder 2002/9/12 5:55
         Re: -ve camber on a 1200 b310gx 2002/9/13 8:47
           Re: -ve camber on a 1200 Blake 2002/9/16 13:31
             Re: -ve camber on a 1200 Niscoupe 2002/9/16 19:02
               Re: -ve camber on a 1200 b310gx 2002/9/17 8:11
                 Re: -ve camber on a 1200 shoom 2002/9/17 9:54
                   Re: -ve camber on a 1200 dimlight65 2002/9/17 14:55
                     Re: -ve camber on a 1200 ang94541 2002/9/17 18:27
                     Re: -ve camber on a 1200 tens_and_twenties 2002/9/17 22:12
                       Re: -ve camber on a 1200 shoom 2002/9/18 2:37
                         Re: -ve camber on a 1200 ang94541 2002/9/18 7:16
                           Re: -ve camber on a 1200 ang94541 2002/9/21 7:05
                             Re: -ve camber on a 1200 rally-a-coupe 2002/9/22 6:57
                               Re: -ve camber on a 1200 ang94541 2002/9/22 8:00
                                 Re: -ve camber on a 1200 datto_dave 2002/9/22 11:35
                                   Re: -ve camber on a 1200 ang94541 2002/9/22 22:44
                                     Re: -ve camber on a 1200 datto_dave 2002/9/23 8:16
                                       Re: -ve camber on a 1200 L18_B110 2002/9/24 3:50
                                         Re: -ve camber on a 1200 ang94541 2002/9/24 7:35
                                           Re: -ve camber on a 1200 stirlingmac 2002/9/24 8:23
                                             Re: -ve camber on a 1200 ang94541 2002/9/24 8:53
                                             Re: -ve camber on a 1200 Niscoupe 2002/9/24 19:19
                                               Re: -ve camber on a 1200 Dragongoose 2002/9/25 3:33
       Re: -ve camber on a 1200 olboy 2002/9/25 4:19
         Re: -ve camber on a 1200 b310gx 2002/9/26 8:58
           Re: -ve camber on a 1200 olboy 2002/9/26 9:16
           Re: -ve camber on a 1200 Dragongoose 2002/9/27 17:51
           Re: -ve camber on a 1200 Dragongoose 2002/9/27 17:51
             Re: -ve camber on a 1200 b310gx 2002/9/27 23:22
               Re: -ve camber on a 1200 Dragongoose 2002/9/28 16:06




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]