User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





ang94541
Re: -ve camber on a 1200
#1
No life (a.k.a. DattoMaster)
Joined:
1999/12/6 8:12
From Castro Valley,CA USA
Group:
Registered Users
Posts: 1191
Offline
I did it with out the blueprint. I used a scribe and a scale/ruler and marked the slots for the bolts first. I sort of freehanded the area to be removed from the big hole. I drilled 8mm holes at the other end of the slots and ground out the rest.
The big hole takes a little bit longer to cut out. I would check to see if the bolts would slide all the way over and grind. Check, and grind somemore.
The top mount has to get cut or it will hit the inside of the tower before it slides all the way over. This piece is a triangle, I just cut off one side( not including the bolts!) about 10-12mm.
I dont have a pic, sorry, i hope this made sense.

Posted on: 2002/9/22 22:44
Transfer the post to other applications Transfer

Subject Poster Date
     -ve camber on a 1200 datto_dave 2002/9/11 9:47
       Re: -ve camber on a 1200 ang94541 2002/9/11 17:50
         Re: -ve camber on a 1200 L18_B110 2002/9/11 23:00
       Re: -ve camber on a 1200 rgrinder 2002/9/12 5:55
         Re: -ve camber on a 1200 b310gx 2002/9/13 8:47
           Re: -ve camber on a 1200 Blake 2002/9/16 13:31
             Re: -ve camber on a 1200 Niscoupe 2002/9/16 19:02
               Re: -ve camber on a 1200 b310gx 2002/9/17 8:11
                 Re: -ve camber on a 1200 shoom 2002/9/17 9:54
                   Re: -ve camber on a 1200 dimlight65 2002/9/17 14:55
                     Re: -ve camber on a 1200 ang94541 2002/9/17 18:27
                     Re: -ve camber on a 1200 tens_and_twenties 2002/9/17 22:12
                       Re: -ve camber on a 1200 shoom 2002/9/18 2:37
                         Re: -ve camber on a 1200 ang94541 2002/9/18 7:16
                           Re: -ve camber on a 1200 ang94541 2002/9/21 7:05
                             Re: -ve camber on a 1200 rally-a-coupe 2002/9/22 6:57
                               Re: -ve camber on a 1200 ang94541 2002/9/22 8:00
                                 Re: -ve camber on a 1200 datto_dave 2002/9/22 11:35
                                   Re: -ve camber on a 1200 ang94541 2002/9/22 22:44
                                     Re: -ve camber on a 1200 datto_dave 2002/9/23 8:16
                                       Re: -ve camber on a 1200 L18_B110 2002/9/24 3:50
                                         Re: -ve camber on a 1200 ang94541 2002/9/24 7:35
                                           Re: -ve camber on a 1200 stirlingmac 2002/9/24 8:23
                                             Re: -ve camber on a 1200 ang94541 2002/9/24 8:53
                                             Re: -ve camber on a 1200 Niscoupe 2002/9/24 19:19
                                               Re: -ve camber on a 1200 Dragongoose 2002/9/25 3:33
       Re: -ve camber on a 1200 olboy 2002/9/25 4:19
         Re: -ve camber on a 1200 b310gx 2002/9/26 8:58
           Re: -ve camber on a 1200 olboy 2002/9/26 9:16
           Re: -ve camber on a 1200 Dragongoose 2002/9/27 17:51
           Re: -ve camber on a 1200 Dragongoose 2002/9/27 17:51
             Re: -ve camber on a 1200 b310gx 2002/9/27 23:22
               Re: -ve camber on a 1200 Dragongoose 2002/9/28 16:06




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]