Browsing this Thread:
1 Anonymous Users
|
|
Re: Rebuild help please? |
|
Just can't stay away  
Joined:
2008/10/30 0:14
From Melbourne
Group:
Registered Users
|
On an assembled inline 4 cyl short motor you find the crank rotation friction is at its highest around half a turn before and after top centre. This is when the piston movement is highest per degree of crank rotation. There should be almost no friction when the pistons are at TDC/BDC (far less movement per degree here).
If you put all the caps on the same way as they came off you should be good to go. The upper and lower bearing shell tangs should be on the same side of the rod but they will not line up.
Posted on: 2014/5/16 3:46
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
