Browsing this Thread:
1 Anonymous Users
|
|
Fitting a 32/36 DGAV-3D webber to a A15 |
|
Just can't stay away  
Joined:
2014/6/9 3:16
From New zealand
Group:
Registered Users
|
Hi
I'm fitting a 32/36 DGAV-3D WEBBER water choke model to my 1200 ute, has any body fitted one of these webbers to their ute before ?
It looks pretty straight forward apart from a couple of vacuumed ports an a a second fuel line ??
My A15 is stock apart from the exhaust system ..... It has one vacuumed port which leads to the dissy and some electrical wires as well. When installing the webber what do I do with the electrical leads ? And which vacuum port do I hook the vacuum lead off the dizzy to ?
I have attached some photos photos of the webber :
Photo 1 is a photo of the 2 vacuum ports no idea where to hook up ?
Photo 2 is what looks like 2 fuel lines ? They both have arrows pointing to them
Photo 3 is of one vacuum port located under where the hook up is for the water choke (the same side as where the vacuum line was on the standard carby for the dizzy)
Photo 4 is of the water choke ports
Photo 5 is of the fuel line ports and 2 vacuum ports
Also can you get away with not hooking up the water choke ? Or is it not a good idea for cold starts with these carbys ?
Any help would be awesome !!
Thanks
Posted on: 2014/7/16 9:00
|
|
_________________
Be aware take care avoid life in a wheelchair
Dattos - 1200 ute 4agze, 1600 L18 twin Su, 1600 ca18det
Current - building a ca18det 1200 ute and drag 1200 ute undecided on the donk !
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
image.jpg (31.61 KB)
Transfer
