Browsing this Thread:
1 Anonymous Users
|
|
Re: Crank pulley bolt removal |
|
Just can't stay away  
Joined:
2014/1/18 5:51
Group:
Registered Users
|
When I pulled mine, I had to make something to hold the pulley. It's an early A12, so it's just the single pulley with 7 holes. I drilled a matching set of holes in a chunk of aluminum and put big socket head cap screws through them, that were very close to the size of the holes in the pulley, then bolted a lever to the other side. Both the lever and the socket breaker bar were about 1.5m long.
Of course, then I got an A14 with the three pulley setup and no holes to bolt into, so next time I'll have to make something that grabs the pulley, I guess. Phoo.
But if you have access to/know someone who has a cnc mill I could post the drill file for drilling the seven holes for the A12 pulley.
Posted on: 2014/8/24 5:41
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
