Browsing this Thread:
1 Anonymous Users
|
|
Re: A12 blown head gasket now a snapped head bolt |
|
Home away from home  
Joined:
2014/2/18 9:33
From Melbourne
Group:
Registered Users
|
Sounds like you've had some crap luck, I hope it turns around soon :/
To answer your questions...
Yes, the 90 degree fitting behind the head is the outlet for the heater core. It shouldn't have caused the crack in the head as you can plug this and run without a heater unit no worries. If it looks blocked now, chances are it's clogged up the heater core, so I'd suggest pulling it out and giving it a good clean along with the heater cock and other hoses. The unit should work fine once it's clean and put back in.
To get out the snapped head bolt, my first attempt would be with an Easy-Out. Failing that, if you were skillful with a welder and you had enough bolt exposed, you could weld something on the end and use that to remove it.
Good luck!
Posted on: 2015/1/15 11:27
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
