Browsing this Thread:
1 Anonymous Users
|
|
Re: carb jet size |
|
|
Just popping in
Joined:
2014/7/17 12:53
Group:
Registered Users
|
I have looked for leaks and not found anything. I used some soapy water to see if it is being drawn in but nothing. I have slowed the idle speed down and readjusted the air bleed screw and yes it is working as I can make the engine run very lumpy with it turned in to it stops then backed it out by 2.5 turns as that seems to be the best place for it.
Yes when over 2.5K the engine will run well up to 4.5K no problem. It will miss fire between idle and 2K but not as bad as 2K to 2.5K.
I till think it's a carb problem as it's always been like it even after removing it and putting it back more that 4 times now to do other things.
Paul.
Posted on: 2015/4/24 2:16
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
