Hey Paul.
I am tempted to tell all about who the new owner is, but it should really come from the new owner, not the old one. All I will say is its going to a great home, in fact one of the best homes. If I mentioned the name you would definitely know who it is!

Regarding the brakes, I'm happy to tell you exactly what I did. Of course you realise the calliper mounting is different on the 1200 strut so you're on your own there. The rotors are RDA units for a U12 pintara, fronts and rears. They are special orders to get them slotted. can you believe slotted pinnie rotors aren't stocked?I used the disk type hub as its offset is about 5mm more outward than the drum type (the width of the drum in that area). Some laser cut brackets, and you're done.

FYI I have lost the drawings for the front calliper brackets I designed, but I do know where the drawing is for the rear calliper mounts. I'm happy to share. The rear is bolt on for either H145 or H165 axles.