User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





dattoman_1000
Re: Valve to piston clearance
#1
No life (a.k.a. DattoMaster)
Joined:
2002/8/11 8:22
From Perth
Group:
Registered Users
Posts: 2691
Offline
Yes I run the same piston in mine
Never kissed a valve and planning on a fresh build using the same pistons again
I run 1.65:1 roller rockers too with this cam.

Check your valve to bore clearance if your running big valves... just to be sure... they were notched out alittle at the factory.
Might not be an issue but doesn't hurt to check.

Attach file:


jpg  block.jpg (76.10 KB)
527_5669583f3140b.jpg 800X600 px

jpg  cam card.jpg (50.25 KB)
527_5669593b85603.jpg 800X471 px

Posted on: 2015/12/10 10:52
Transfer the post to other applications Transfer

Subject Poster Date
     Valve to piston clearance thaifrog 2015/12/9 15:09
       Re: Valve to piston clearance ddgonzal 2015/12/9 22:47
       Re: Valve to piston clearance thaifrog 2015/12/10 2:53
       Re: Valve to piston clearance D 2015/12/10 3:30
         Re: Valve to piston clearance ddgonzal 2015/12/10 3:55
       Re: Valve to piston clearance D 2015/12/10 3:59
       Re: Valve to piston clearance thaifrog 2015/12/10 9:30
       Re: Valve to piston clearance thaifrog 2015/12/10 9:57
       Re: Valve to piston clearance dattoman_1000 2015/12/10 10:52
         Re: Valve to piston clearance nzdatman 2015/12/12 8:56
       Re: Valve to piston clearance D 2015/12/10 12:15
       Re: Valve to piston clearance D 2015/12/10 12:17
       Re: Valve to piston clearance thaifrog 2015/12/10 13:33
       Re: Valve to piston clearance thaifrog 2015/12/12 10:12
       Re: Valve to piston clearance Dundee1000 2015/12/14 9:03
         Re: Valve to piston clearance dattoman_1000 2015/12/14 10:22
       Re: Valve to piston clearance nzdatman 2015/12/16 8:16
       Re: Valve to piston clearance thaifrog 2015/12/16 10:10
         Re: Valve to piston clearance dattoman_1000 2015/12/16 13:15




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]