Browsing this Thread:
1 Anonymous Users
|
|
Replace bearings for FS5W60A Transmission |
|
Home away from home  
Joined:
2015/11/10 17:48
From Fort Worth, Texas
Group:
Registered Users
|
Attempting to go through my transmission to replace bearings. Received the bearing kit and also have a copy of the original PDF service manual. Trying to separate the transmission case from the adapter plate (step 12 from service manual). I can get them separated by about 1/2 inch and then it gets hung up. Dont want to put to much blunt force on the transmission case with the rubber hammer. Also as I was pushing/pulling the gear assembly gently to try and separate them, one of the fork rods slid towards the transmission case and now the gears will not turn. Hope I havent damaged anything. All the gear components look in good shape from what I can see with the rear extension assembly off. Any help on this would be greatly appreciated.
Posted on: 2016/1/24 15:42
Edited by TexasMidget on 2016/1/24 19:29:28
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
