Browsing this Thread:
1 Anonymous Users
|
|
Re: Replace bearings for FS5W60A Transmission |
|
Home away from home  
Joined:
2015/11/10 17:48
From Fort Worth, Texas
Group:
Registered Users
|
Thanks Andy. Set a block of wood on the end of the main input shaft and after several blows with the rubber hammer it backed out of the transmission case. There was no way this was going to come out by holding the gear assembly and hitting the backside of housing as the service manual calls for. That main bearing is really set in there good. The shop that sold me the kit also repairs these transmissions and he does the same thing. All the gears look in great shape. Kudos to Nissan once again. The main bearing is the only one that seems to require replacement but will change all of them out since I have the entire kit. I attached a close up of the bearings and seal for your reference. The seal appears to be made in Taiwan and the bearings in Japan.
Posted on: 2016/1/26 5:59
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
bearings.seal.jpg (45.27 KB)
Transfer
